The Conceptus Tongue switch with Canon digital plug is compatible with many of the Canon series

of digital cameras, such as the EOS 1D, 5D, 10D, 20D, 30D and 40D.

This is a mouth-operated, totally electronic shutter releases for use with any still camera with a remote

shutter release jack. The switch plugs directly into the camera without need for a separate switch module.

The design is securely sealed and waterproof. Since the switch is mouth-operated, it does not interfere

with grips on exits or in freefall, or with canopy deployment, control and emergency procedures.

This switch is designed to work with the following Canon models: Canon EOS 7D / Canon EOS 1V /

Canon EOS 3 / Canon EOS 1D / Canon EOS 1DS / Canon EOS 1DS MARK II / EOS 1DS MARK IV /

Canon EOS 10D / Canon EOS 20D / Canon EOS 30D / Canon EOS 40D / Canon EOS 5D/

Canon EOS D30 / Canon EOS D60.

The Conceptus Tongue Switch is compatible with the Canon Digital Rebel, XT, XS, XSI and XTI, as well

as most Canon film cameras. This switch is also compatible with the HypEye D Pro Expansion Kit.

This is a mouth-operated, totally electronic shutter release for use with any still camera with a remote

shutter release jack. The Tongue Switch is comprised of a 1/2 inch pressure-sensitive switch mechanism,

a 1 inch flattened and bite-resistant stem, a 36 inch coaxial wire, and a 2.5mm plug with a 90 degree elbow

bend. It is configured so that the pressure-sensitive switch face is always oriented towards the user's tongue,

regardless of the direction of insertion into the mouth, thus allowing the wire to be routed to the left or right.

The Tongue Switch is securely sealed and waterproof. Since the switch is mouth-operated, it does not

interfere with grips on exits or in freefall, or with canopy deployment, control and emergency procedures.

The Conceptus 2.5mm Tongue Switch is compatible with the following cameras:

Canon EOS 550D, Canon EOS 1000D / 650D / 500D / 450D / 400D / 350D / 300D, Canon EOS Rebel T2i,

T3i, T5, Canon Kiss X4, Rebel, Rebel XT, Rebel XTi, Rebel XSi, Rebel XS, Rebel T1i & Canon Powershot G10

Digital SLR Cameras, and the HypEye D Pro Expansion Kit or Photo Kit.

The Conceptus Bite Switch is compatible with the Canon Digital Rebel, XT, XS, XSI and XTI, as well

as most Canon film cameras. This switch is also compatible with the HypEye D Pro Expansion Kit.

This is a mouth-operated, totally electronic shutter release for use with any still camera with a remote

shutter release jack. The Bite Switch is comprised of a durable, sealed tubular switch assembly measuring

1.5 inches long by 1/4 inch diameter, a 36 inch coaxial wire, and a 2.5mm plug with a 90 degree elbow bend.

During use, the switch is placed in the mouth with the wire pointing either to the right or left. The Bite Switch

is securely sealed and waterproof. Since the switch is mouth-operated, it does not interfere with grips

on exits or in freefall, or with canopy deployment, control and emergency procedures.

The Conceptus 2.5mm Bite Switch is compatible with the following:

Canon EOS 550D, Canon EOS 1000D / 650D / 500D / 450D / 400D / 350D / 300D, Canon EOS Rebel T2i,

T3i, T5, Canon Kiss X4, Rebel, Rebel XT, Rebel XTi, Rebel XSi, Rebel XS, Rebel T1i & Canon Powershot G10

Digital SLR Cameras, and the HypEye D Pro Expansion Kit or Photo Kit.

This mount has been designed to reduce the risk of line entanglement with your camera.

This version of the Tonfly safety mount features a flat back that attaches to any flat helmet surface or to flat

mounts such as the Tonfly Pro Mount. Includes screws for attachment.

This bracket is made of a carbon fiber composite to give the carbon fiber elasticity. Suitable for all GoPro

cameras. For the HERO5 you have to extend the mounting hole with a screwdriver for a perfect fit.

The link must be ordered separately.

This mount has been designed to reduce the risk of line entanglement with your camera.

This version of the Tonfly safety mount features a rounded back that attaches to curved helmet

surfaces. Includes screws for attachment.

This bracket is made of a carbon fiber composite to give the carbon fiber elasticity. Suitable for all GoPro

cameras. For the HERO5 you have to extend the mounting hole with a screwdriver for a perfect fit.

The link must be ordered separately.

Replacement or extra camera screw for Tonfly helmet camera mounts.

The diameter of the screw is good for any video or photo camera. The length of the

thread is 20mm. This is the standard camera screw supplied with the Tonfly camera

mounts that require a camera screw.

The Spring Kit supplies the items you require to change the visor locking springs on your G3 helmet. Included are 6 replacements springs (note that only 1 each side it needed leaving you with spares). As well as 2 replacement screws for the centre of each mechanism. 

This Cutaway Chinstrap allows the user to quickly disconnect the chinstrap when under load.

Made from selected webbings and industry standard materials it's positioning and ease of use give you peace of mind.